Modify

On the Mining | Underground Design tab, in the Modify group::

• Click the Validate tool to detect and repair polygon network errors.

• Click the Condition String tool (or select Condition String from the Vizex right-click menu) to prepare a string for wireframing by setting the allowable length of string segments.

• Select Angle | 2D Angle / Distance to specify a bearing (azimuth) and a distance for the next segment when digitising a string. The distance is measured using the horizontal (projected onto the plan) distance.

• Select Angle | 3D Angle / Distance to specify a bearing (azimuth) and a distance for the next segment when digitising a string. The distance is measured using the actual 3D distance (taking into account the elevation).

• Select Reverse to reverse the direction of selected polygons, where necessary, so that the direction of all polygons is the same. The point order of all selected polygons will match the point order of the first polygon in the selection.

• Click the Gradient tool to set the gradient (and Gradient Units) for a selected string or segment.

  

• Click Simplify String to reduce the number of data points in selected strings, while keeping those points which fall within a specified tolerance.

  (You can also specify a tolerance value, or select a Simplify … (form) option from the tool menu.)

• Click Smooth, or select a Smooth option, to smooth one or more selected strings, or segments, in Vizex.

• click Rotate Strings (Interactive), to rotate the strings and/or points you have selected in Vizex around a pivot point.

  

• Select an option from the Delete tool menu to delete selected strings or delete selected segments or points on a string.