Firing Sequence Options

On the Mining | Blast Design > Charging tab: Click Firing Sequence Options to set up the surface connectors and charge templates to be applied to a firing sequence.

Surface Connectors

Use the drop-down boxes at the left of each row to select the Surface Connectors to be applied to a firing sequence.

You can use the buttons on the toolbar (or use the right-click menu) to manipulate the rows in the list.

	Click to Clear all rows.
	Click to Insert a row above the selected row or Append a row to the end of the list.
	Click to Delete selected rows.
	Click to Move Up or Move Down selected rows.
	Click the Forms button to load a saved form set.

Charge Template

Click on the List icon to select the charge template. Charge Templates are created and configured using the Edit Charge Templates form.

Tip: A per-block firing sequence Start delay value can be set via the Properties pane when a block is selected in Vizex:

Delay

The delay in milliseconds for the detonator (configured on the Surface Connectors tab of the Consumables Library form) is shown in the Delay (ms) column. Each connector must have a delay value specified. This value will contribute to the blast delay of the holes. Note; a value of 0 is acceptable.

OK

Click OK. The surface connectors and the delays you have selected will be assigned to a firing sequence.