Georeference an Image

Triangulations in the application can have an image mapped to them to assist in visualisation, scheduling and particularly Haulage Network placement.

The process to georeference points is manual and normally you will want to map exactly three points on the Triangulation and three points on the Image.

In order to best georeference an image, pick three clear points of interest on your triangulation (which exist on your image as well) and copy the coordinates of those points into a text editor, i.e. Notepad++. From here you can then:

1. Right click any Triangulation (triangulations can share a georeferenced image mapping) and choose Properties.
2. Click the ellipsis [...] next to the Georeferenced Image drop-down to get a new popup menu.



3. Right click the Geoereferenced Images header and choose New Georeferenced Image.
4. Double click into the "No image data" section to import your image.
5. Right click the image in the same three locations from your triangulation and pair them together using the + Mappings at the bottom of the popup window.

Once you have three mappings you can "Select" the image and wait for your triangulation to load with an image now applied.