EH5: Equipment Timeline

EH5: Equipment Timeline

Description:
A comprehensive report on the date, start time and duration that selected equipment was in one of the selected states during the defined period.
This panel is most useful for data validation – if there is reason to suspect that activities have been entered incorrectly, this may assist Administrators or Control Room Operators in identifying and resolving the problem. For more detailed analysis, the Equipment Timeline with Measures panel can be used.

Associated panels:
EH6: Equipment Timeline With Measures	A comprehensive report on the date, start time and duration of selected equipment. The equipment status at the time, the measure type and its value are all reported for the defined period.
EH7: Meantime Between Failures	The total down hours of the selected machinery for the defined period is reported. A count of the number of failures, the mean time between failures and the mean time for repair during the period are included.
EH8: Mean Time Between Failures Graph	The results are presented as histograms of the Number of Maintenance Events and Time to Repair. It is an analysis of the frequency selected equipment is in maintenance, and of the time taken to repair.
Terms used:
Mean Time Between Failure	The mean operating time between the equipment downtime. Reported as the value of MTBF.
Panel Definition:
A panel is defined by a set of report parameters and attributes which may vary from site to site:
Parameter	Attributes
Site	Select from the list of configured sites.
Period	Year, Month, Day Shift, Macro.
Equipment	The unit of equipment assigned as Secondary Unit.
Status	All States, Group, Type, Category, Detail.

Summary levels:
The panel will report information for the selected Status Attribute levels.

Data capture method:
Paper log	Voice radio	Automated network

Target audience:
Management	Engineering	Geology	Survey	Maintenance
Personnel	Control Room Operator	Contractors	Drilling	Production