Asset Health
On the Services ribbon, click Asset Health to display the dashboards showing the performance against the reading definitions you have configured for your assets.
Introduction
The Asset Health module is designed to allow you to monitor Asset Health Readings from the assets and devices for which you have configured them.
Terminology
| PGN {Parameter Group Name} |
The J1939 PGN comprises an 18-bit subset of the 29-bit extended CAN ID. Serves as a unique frame identifier within the J1939 standard. It is often referred to as a "message". |
| SPN (Suspect Parameter Name) |
The J1939 SPN serves as the identifier for the CAN signals (parameters) contained in the databytes. SPNs are grouped by PGNs and can be described in terms of their bit start position, bit length, scale, offset and unit - information required to extract and scale the SPN data to physical values. It is often referred to as a "signal". |
| Asset Health Reading |
Defines an asset health record in Pitram. It is an abstraction on top of various integration types. Readings from specific integrations map to Asset Health Reading. For example for J1939 it represents the "signal". Every readings contains:
|
| Asset Health Reading Name | The name uniquely identifying the Asset Health Reading. For example "Total Distance". |
| Asset Health Reading Value | The actual Asset Health Reading Value. For example 20. |
| Source Address |
Identifies the source of a message (PGN). E.g. gear box. It is dynamic, it can change. 1 byte, included in the PGN header |
To enable the Asset Health feature, the related Reference Data groups and attributes must be deployed. For information on deploying Asset Health, see Asset Health Deployment.
For information on configuring Asset Health, see Configuration.
Information on Asset Health dashboards is contained in Dashboard.