Drillhole Tracker Display

The Drillhole Tracker tool enables tracking of the deviation between a planned and active drillhole. When the Drillhole Tracker form has been configured and the tool is run, the Report will be displayed in the Vizex Report Viewer and information will be displayed in Vizex with the Drillhole | Tracker tab open:

The Report Viewer displays the Drillhole Tracker report output, which includes the Straight, Projected and Adjusted values for the selected hole.

Tools in the Report Viewer pane are used to configure, sort, export the report and more. See Report Viewer.

Using the Drillhole Tracker

With the data from the Drill Tracker tool displayed in Vizex, you can view and modify the data and update the report as required.

Tools

Using the tools in the Tracker tab, you can:

	Click Edit Form to open the Drillhole Tracker form and configure the parameters.
	Click Show Planned to show the planned drillhole in the displayed data.
	Click Show Active Straight to show the active drillhole as if it were to continue straight.
	Click Show Active Projected to show the active drillhole as if it were to continue as projected.
	Click Show Active Adjusted to show the active drillhole as if it were to continue in the adjusted Lift and Drift.
	Click Show Distances to display the distance between the planned and active end of the drillhole.
	Click Show Pierce Points to show the wireframe intersections on the drillholes.
	In the Adjust group, you can make changes to the Drift and Lift values for the selected drillhole, as well as change the Over Distance past which the adjustments should be made. Use the controls in the Drift and Lift fields to adjust the displayed value. Enter the Over Distance value directly in the field provided. Adjustments made to the Drift, Lift and Over Distance values can be written or appended to the Drillhole Tracker report.
	Click Update Report to update the displayed report with the adjusted values for the distance between planned and active end of holes.
	Click Close top finish using the Drillhole Tracker tool and close the Tracker tab.

Drillhole Tracker