PA2: Equipment Availability by Period
| Description: |
|---|
| This panel presents the time selected equipment spent in operating, idle and down states for the defined period. The percentage figures of availability, utilisation and UofA are reported. A selected measure is reported as a total and as a rate (measure per operating hour) for the period. Presenting the results as subdivisions of the reporting period (shifts, for example) highlights any inconsistency in individual equipment utilisation and utilisation across the selected fleet. |
| Associated panels: | |
|---|---|
| PA1: Equipment Availability | The time that selected equipment spent in Operating, Idle and Down states during the defined period is reported. From these states the percentage figures of equipment availability, utilisation and U of A are calculated and reported. |
| G3: Equipment Hours (Pie Graph) | This panel is similar to the Equipment Hours (Percentage Pie Graph) panel. The pie graph and the itemised list of states in this panel are the actual time the selected equipment spent in the state during the defined period. |
| G1: Equipment Availability and Utilisation | This panel presents a line graph of the average availability and utilisation of the selected equipment for the defined period. The U of A is also included. It could be used in a Dashboard or to display U o f A trends in weekly and monthly meetings. |
| Terms used: | |
| Availability | (Operating + Idle / Operating + Idle + Down) * 100 |
|
U of A Utilisation of Availability |
(Operating / (Operating + Idle)) * 100 |
| Utilisation | (Operating / (Operating + Idle + Down)) * 100 |
| Panel Definition: | |
|
A panel is defined by a set of report parameters and attributes which may vary from site to site: |
|
| Parameter | Attributes |
| Site | Select from the list of configured sites. |
| Period | Year, Month, Day Shift, Macro. |
| Equipment | The unit of equipment assigned as Secondary Unit. |
| Measure | Select from the list of available values. |
| Summary levels: |
|---|
| The final report will include data at the Attribute level for the following Parameters: Period, Equipment and Status. |
| Data capture method: | ||
|---|---|---|
| Paper log | Voice radio | Automated network |
| Target audience: | ||||
|---|---|---|---|---|
| Management | Engineering | Geology | Survey | Maintenance |
| Personnel | Control Room Operator | Contractors | Drilling | Production |