MM2: Equipment Measures

MM2: Equipment Measures

Description:
Material measures recorded against selected items of equipment over a defined period. Overall total measures are included in the report, for example, the metres advanced by production drills, the litres of fuel used by dozers, or the metres sprayed by shotcreters.

Associated panels:
MM3: Equipment Measures by Location	For each piece of selected equipment the measure types associated with a source during the defined period is listed. The measure type and the source are selected. The total measures for each piece of equipment for the period are included.
MM5: Equipment Measures by Operator	The panel quantifies the selected measure type and identifies the operator of the selected equipment for a defined period. The material type is selected. The overall total measures are included.
MM13: Material Movements	The amount of material moved from one of the selected sources to one of the selected destinations during the defined period. The total material moved during the period for each source-destination group and the overall total are included.
Terms used:
Rate	Measure per unit time. For example, tonnes per operating hour – measure/ operating hours.
BCM	Bank Cubic Metres. A measure of the volume of a cubic metre of rock, in situ, before it is drilled and blasted.
Panel Definition:
A panel is defined by a set of report parameters and attributes which may vary from site to site:
Parameter	Attributes
Site	Select from the list of configured sites.
Period	Year, Month, Day Shift, Macro.
Equipment	The unit of equipment assigned as Secondary Unit.
Material	Type, Category, Group.
Measure	Select from the list of available values.

Summary levels:
The final report will include data at the attribute level for the following parameters: Equipment and Status.

Data capture method:
Paper log	Voice	Automated

Target audience:
Management	Engineering	Geology	Survey	Maintenance
Personnel	Control Room Operator	Contractors	Drilling	Production