Naming
Use the Naming tab of the Extrapolate Reference Seam form to generate names for the blocks that are written to the Output file.
-
Select the Generate Interburden check box to enable the Interburden Definition grid.
- Optionally specify a Prefix and a Suffix for the blocks written to the output file.
- Select the Seam Above and Seam Below check boxes to associate the blocks with the seams that lie immediately above and below.
- When you are combining multiple seams into a single unit, typically a combination of the roof (highest) and floor (lowest) seam names are used as the unit name. To help differentiate between Seam above and Seam below, you can specify a Separator.
The Clear button in the grid toolbar will remove all information already added to the grid.
You can use the Save current form... button to save the details in the grid to a form, or load a previously saved form into the Interburden Definition grid.