Editing
On the Wireframe tab, in the Editing group:
-
Click Copy to Active Layer (or right-click on the wireframes in Vizex and select Selection | Copy Wireframes to Active layer) to copy the selected wireframes to the active layer.
-
Select a Cut operation that will cut one or more selected wireframes. To define a cutting surface, one or more polylines or polygons are extruded in directions at right angles to the projection plane.
The Cut Keep Inside option on the menu, will keep the wireframes that are situated inside the cutting surface. INSIDE = BELOW or RIGHT depending on the orientation of the surface.
-
Click Buffer to create an outer or inner 3D shell at a fixed offset distance or buffer from a nominated wireframe.
-
click Interactive Clip to clip a DTM (or a surface wireframe), using one or more polygons in Vizex.
-
Click Convert (Wireframe) to convert the coordinates in an input wireframe and optionally write the results to a second wireframe.
-
Select Convert Coordinates, to convert string or wireframe coordinates between two plane grids.
-
Click Move/Rotate to interactively move, copy, or rotate the wireframes you have selected in Vizex. Selecting this option will activate wireframe transform display mode.
-
Click Copy/Move Wireframes (or select Copy/Move Wireframe from the right-click menu) to copy or move selected wireframes by a specified amount.
-
Click Move (Shift) to move a wireframe a specified distance in a specified direction.
-
Click Separate to separate a triangulation into its constituent volumes or shells, depending on the separation mode selected.
-
Select Save As Single Wireframe (or select the same option from the right-click menu) to save the wireframes you have selected in Vizex as a single wireframe.
-
Select Save As Single to save the wireframes in a wireframe set as a single wireframe.
-
Click Save As Wireframe Set (or select the same option from the right-click menu) to save the wireframes you have selected in Vizex as a wireframe set.
